Certainteed AquaBead Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für Zuhause Certainteed AquaBead herunter. CertainTeed AquaBead User Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 1
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
CertainTeed
PREPARATION
•AquaBeadcanbecut
tolengthusingscissors,
metalsnipsorachopsaw.
Save time by using a chop saw to
cut multiple pieces of AquaBead
to the same length.
• Usingaspraybottleorpumpsprayer,
completelywettheadhesiveside
oftheAquaBead
®
withclean,
ordinarytapwater.
IMPORTANT: Do not use a sponge to
apply water as it will remove adhesive.
Add a bit of food coloring to the water
to make it easier to see where you
have sprayed.
• Ifyouapplylesswatertheworkingtime
isdecreased,butthetack(stickiness)is
increased.Toextendworkingtimeadd
morewater.
• Afterapplyingwater,allow20–30
secondsfortheAquaBeadtoactivate.
Temperatureandhumiditymayaffect
dryingtimes.
• Makesuretheentireadhesive
surfaceonthebackofAquaBead
iswetbeforeapplication.
APPLICATION
•Placethewet,adhesive
sideoftheAquaBeadon
thewallcorner,aligning
ittightlytotheceiling.
Thebeadededgeofthe
AquaBeadshouldbesquaredwiththe
centreofthecorner.Makesure
itisstraight.
• PresstheAquaBeadfirmlybyhandor
witharoller,makingsuretheflanges
contactthedrywallsurfacecompletely.
• REPOSITIONING:AquaBeadcanbe
removed,re-wettedandrepositionedif
theadhesivehasnotset.
• AquaBeadadhesivewillnotstickto
previouslyfinisheddrywallsurfaces.
Useasprayadhesiveorjoint
compoundtoadheretopreviously
finishedsurfaces.
• Ifanareahasnotproperlybonded,
itcanbemechanicallyfastenedwith
staplesbeforecoating.
IMPORTANT: Once the adhesive has set,
the AquaBead will be permanently bonded
to the drywall and cannot be repositioned.
If you have exposed drywall edges, use
L -Trim for a quick and clean finish.
• Ifpreferred,TapingorMidto
HeavyweightAllPurposeJoint
Compoundscanbeusedtoadhere
AquaBead.Ifusingthismethod,
ensurejointcompoundhasthoroughly
driedbeforeapplyingafillcoat.
Create a guide with a pencil or chalk
line to get straight corners, especially
on bulkheads and long runs.
FINISHING
•AquaBeadcornercan
befilledafter30minutes
usingAll-Purposeor
Finishingjointcompound.
• Applyjointcompoundoverthe
AquaBeadusingan8"–10"tapingknife,
fillingtheholes.Allowcompoundtodry
thoroughly.
• SkimovertheAquaBeadcorner
oncemorewithjointcompoundusing
a10"–12"finishingknife.Letdry,then
sandandpaint.
CertainTeed AquaBead
®
is an easy-to-apply, water-activated,
self-adhesive drywall corner that doesn’t blister, bubble, dent or crack.
Wheninstallingdrywallfor90°corners,hangOutside90asshowninFigure1a.Ensurethatthedrywall
atthecornerdoesnotoverlapthejointcompoundasshowninFigure1b.
WheninstallingdrywallforBullnosecorners,hangasshowninFigure.2aand2b.Ensurethatdrywallat
thecornersdonottouchcreatinganopenareafortheradiusofthebead.
Installation Instructions
FLANGES
BEAD
FLANGES
BEAD
FLANGES
BEAD
YES
YES
NO
YES
NO
YES
NO
YES
Figure1a
Figure2a
Figure1b
Figure2b
TIP
TIP
TIP
TIP
Shipped in water-resistant packaging. Store in a dry location. Protect from moisture.
CertainTeed Corporation
P.O. Box 860
Valley Forge, PA 19482
Professional: 800-233-8990
Consumer: 800-782-8777
www.certainteed.com http://blog.certainteed.com
ASK ABOUT ALL OF OUR OTHER CERTAINTEED
®
PRODUCTS AND SYSTEMS:
ROOFING SIDING TRIM DECKING • RAILING FENCE FOUNDATIONS
GYPSUM CEILINGS• INSULATION PIPE
© 03/12 CertainTeed Gypsum, Inc. Printed in Canada
Code No. CTG-4022
Corner Reinforcement
Seitenansicht 0
1

Inhaltsverzeichnis

Seite 1 - Corner Reinforcement

CertainTeedPREPARATION•AquaBeadcanbecuttolengthusingscissors,metalsnipsorachopsaw. Save time by using a chop saw to cut multiple piece

Kommentare zu diesen Handbüchern

Keine Kommentare